Mastering The Magic: Your Guide To Successfully Using A Direct To Film Printer

In News 0 comments

Mastering The Magic: Your Guide To Successfully Using A Direct To Film Printer

Using a direct-to-film printer has caused quite a buzz these days. As of now, it is one of the most popular printing techniques in the market and has revolutionized the custom apparel industry.

Direct to Film Printer


After all, everyone wants to use their creativity and showcase it on all kinds of surfaces, ranging from promotional products to garments. The good news is that you can now do this in the blink of an eye, thanks to direct-to-film printers

Ready to get to know more? Let’s dive into this printing process right away!

Mastering The Use Of Direct To Film Transfer

1. Create A Design

The first thing to do would be to fire up your choice of graphic design software and begin creating your masterpiece. After designing in your software of choice, transfer all your creative designs to CadLink to begin printing in ink right away!

2. Choose A Fabric

You need to choose a fabric that will be compatible with a direct-to-film printer, as well as your project. The good news is that when it comes to direct-to-film printing, your fabric does not need to be pre-treated. This means that you can begin transferring your masterpieces right away. 

3. Begin Printing

It is now time to load the PET film into the trays of your printer. Feel free to go wild with your choice of hues and let your creative mind take over. Watch the magic happen as your work comes to life!

4. Powder

Next, you will have to apply hot-melt powder to the film you have just printed and melt it in a curing oven for at least two minutes. You can also choose to use a heat press if you do not want to wait around for the stunning result. 

5. Pre-Press

If you want the final print to come out looking as flawless as it does in your mind, you need to press your fabric in advance. This will help get rid of any wrinkles and make sure your masterpiece looks as refined as it did when you first imagined it!

6. DTF Transfer

This is the moment the spotlight will shine on you as you put the cured film on the fabric you pressed in advance. Make sure to keep the temperature at 300 to 330 Fahrenheit during this time for at least 10 to 20 seconds for the best results. 

7. Peel And Press

Give the film and fabric time to cool down, and then peel them away from each other. Once this is done, you will have to do a final press for at least 10 seconds and voila! Your masterpiece will be good to go.  

8. Final Touches

Once your masterpiece is ready, it is time to do a quality check. This means that you will have to make sure that the color and sharpness are accurate. Make sure to look for any defects to avoid any disappointments later. 


There is no denying that direct-to-film printers are currently riding the wave of technological advancement and digital innovation. And they are headed to the forefront of the market. If you want to jump on the bandwagon and reap the rewards of this cutting-edge technology, a direct-to-film printer would be the way to go.